|
Bird Termaline 6151 Wattmeter RF Load (New) 2-2000 MHz (Uses Model 43 Elements) Bird Termaline(c) 6151 Wattmeter and RF Load. 2-2000 MHz. The 6151 uses the standard Model 43 elements. Scales for 0.25, 0.5, 1.0, 5, 10, 25, 50, 100 Watts (scales also valid for 250, 500, etc. Watts intermittent duty). New old stock, perfect condition, specifications are guaranteed for 90 days. Bird QC connector Type N(F) input connector, 50 Ohms. Rated for 100 Watts continuous, can be used at higher power as long as the RF Load is not allowed to overheat. I've tested elements to 500 Watts in short bursts with no problems and no noticeable heating. Accuracy is +/- 5% fs to 1 GHz, +/- 8% fs from 1 GHz to 2 GHz. Detachable meter head for remote operation. This is a discontinued Bird product and a rare find in new condition. Elements are not inlcuded. |
||||||
| |||||||
|
Bird Termaline 6151 Wattmeter RF Load (Used) 2-2000 MHz (Uses Model 43 Elements) Bird Termaline(c) 6151 Wattmeter and RF Load. 2-2000 MHz. The 6151 uses the standard Model 43 elements. Scales for 0.25, 0.5, 1.0, 5, 10, 25, 50, 100 Watts (scales also valid for 250, 500, etc. Watts intermittent duty). New old stock, perfect condition, specifications are guaranteed for 90 days. Bird QC connector Type N(F) input connector, 50 Ohms. Rated for 100 Watts continuous, can be used at higher power as long as the RF Load is not allowed to overheat. I've tested elements to 500 Watts in short bursts with no problems and no noticeable heating. Accuracy is +/- 5% fs to 1 GHz, +/- 8% fs from 1 GHz to 2 GHz. Detachable meter head for remote operation. This is a discontinued Bird product and a rare find in excellent condition. Elements are not inlcuded. |
||||||
| |||||||
|
Bird 8892D300 Termaline RF Load (New and Used) 2500 Watts DC to 2.5 GHz 1 5/8 EIA Flange 8892D-300 Termaline® RF Coaxial Termination 2.5 kW, Oil-Coolled, 1 5/8" EIA Flange Connector D Series is especially tuned for low VSWR 470-860 MHz for DTV
The Model 8890-300 TERMALINE® Load Resistor is a self-contained high-power 50 ohm coaxial transmission line termination requiring no outside power source or additional equipment. It provides accurate, dependable, and practically non-reflective termination for testing and adjusting transmitters under non-radiating conditions. The load consists essentially of a cylindrical film type resistor immersed in a dielectric coolant. The resistor, individually selected for its accuracy, is enclosed in a special tapered housing which provides a linear reduction in surge impedance directly proportional to the distance along the resistor. This produces the uniform, practically reflectionless line termination from dc to 2.4 GHz. As shown except with 1 5/8 EIA Flange Input Connector Select New or Used Below. Bird Specifications and Manual |
||||||
| |||||||
|
Bird 8892-300 Termaline RF Load (New) w/Thermoswitch Option 2500 Watts DC to 2.5 GHz 1-5/8" Flanged Connector 5000 Watts w/BA-300 Optional Blower Assembly 8892-300 Termaline® RF Coaxial Termination 2.5 kW, Oil-Cooled, 1-5/8" Flange Connector
The Model 8892-300 TERMALINE® Load Resistor is a self-contained high-power 50 ohm coaxial transmission line termination requiring no outside power source or additional equipment. It provides accurate, dependable, and practically non-reflective termination for testing and adjusting transmitters under non-radiating conditions. The load consists essentially of a cylindrical film type resistor immersed in a dielectric coolant. The resistor, individually selected for its accuracy, is enclosed in a special tapered housing which provides a linear reduction in surge impedance directly proportional to the distance along the resistor. This produces the uniform, practically reflectionless line termination from dc to 2.4 GHz. Bird Specifications and Manual |
||||||
| |||||||
|
Bird 8890-300 Termaline RF Load (New) 2500 Watts DC to 2.5 GHz 5000 Watts w/BA-300 Optional Blower Assembly 8890-300 Termaline® RF Coaxial Termination 2.5 kW, Oil-Cooled, LC Female or Type N Female
The Model 8890-300 TERMALINE® Load Resistor is a self-contained high-power 50 ohm coaxial transmission line termination requiring no outside power source or additional equipment. It provides accurate, dependable, and practically non-reflective termination for testing and adjusting transmitters under non-radiating conditions. The load consists essentially of a cylindrical film type resistor immersed in a dielectric coolant. The resistor, individually selected for its accuracy, is enclosed in a special tapered housing which provides a linear reduction in surge impedance directly proportional to the distance along the resistor. This produces the uniform, practically reflectionless line termination from dc to 2.4 GHz. Bird Specifications and Manual |
||||||
| |||||||
|
Bird 8890-300 Termaline RF Load 2500W - 5000W (Used/New) 2500 Watts up to 2.5 GHz (5000W w/BA-300 option) 8890-300 Termaline® RF Coaxial Termination Used in New Condition 2.5 kW (5 kW w/BA-300 Option) LC Female or Type N Female Bird QC Connectors
The Model 8890-300 TERMALINE® Load Resistor is a self-contained high-power 50 ohm coaxial transmission line termination requiring no outside power source or additional equipment. It provides accurate, dependable, and practically non-reflective termination for testing and adjusting transmitters under non-radiating conditions. The load consists essentially of a cylindrical film type resistor immersed in a dielectric coolant. The resistor, individually selected for its accuracy, is enclosed in a special tapered housing which provides a linear reduction in surge impedance directly proportional to the distance along the resistor. This produces the uniform, practically reflectionless line termination from dc to 2.4 GHz. Used in New condition Select BA-300 Blower Assembly below for 5 KW Continuous Operation. Bird Specifications and Manual |
||||||
| |||||||
|
Bird 8895-300 Termaline RF Load (New) 2500 Watts DC to 2.5 GHz 1-5/8" EIA, Unflanged 8895-300 Termaline® RF Coaxial Termination 2.5 kW, Oil-Cooled 1-5/8" Unflanged Connector
The Model 8895-300 TERMALINE® Load Resistor is a self-contained high-power 50 ohm coaxial transmission line termination requiring no outside power source or additional equipment. It provides accurate, dependable, and practically non-reflective termination for testing and adjusting transmitters under non-radiating conditions. The load consists essentially of a cylindrical film type resistor immersed in a dielectric coolant. The resistor, individually selected for its accuracy, is enclosed in a special tapered housing which provides a linear reduction in surge impedance directly proportional to the distance along the resistor. This produces the uniform, practically reflectionless line termination from dc to 2.4 GHz. Bird Specifications and Manual |
||||||
| |||||||
|
Bird BA-300-115 Blower Assembly for Bird RF Loads 1 KW to 2.5 KW (Used) Doubles The Continuous Power Rating Bird Blower Assembly Doubles RF Load Ratings BA Series Blower Assemblies The BA-300 Series consists of two high frequency fans, with vertical side baffles to direct air over the loads radiator fins. The blower doubles the normal RF input rating of the installed load, e.g. a 2.5kW load can dissipate 5 kW.
|
||||||
| |||||||
|
Bird 8860 Termaline RF Load (New or Used) 1.5 KW DC-2 GHz 8860 Termaline® RF Coaxial Termination 1500 Watts Oil-Cooled, LC Female or Type N(F) Compact, about 1/2 the Weight and size of the 2.5 kW loads
The Model 8860 TERMALINE® Load Resistor is a self-contained high-power 50 ohm coaxial transmission line termination requiring no outside power source or additional equipment. It provides accurate, dependable, and practically nonreflective termination for testing and adjusting transmitters under nonradiating conditions. The load consists essentially of a cylindrical film type resistor immersed in a dielectric coolant. The resistor, individually selected for its accuracy, is enclosed in a special tapered housing which provides a linear reduction in surge impedance directly proportional to the distance along the resistor. This produces the uniform, practically reflectionless line termination from dc to 2 GHz. Used in Like New Condition Product Specifications:
Operating Manual and Specifications |
||||||
| |||||||
|
Bird 8833-300 Termaline RF Load (used) 1000-1500 Watts DC to 2.4 GHz 8833-300 Bird Termaline® RF Coaxial Termination 1000 Watts, Oil-Cooled, LC Female or Type N Female
The Model 8833-300 TERMALINE® Load Resistor is a self-contained high-power 50 ohm coaxial transmission line termination requiring no outside power source or additional equipment. It provides accurate, dependable, and practically nonreflective termination for testing and adjusting transmitters under nonradiating conditions. The load consists essentially of a cylindrical film type resistor immersed in a dielectric coolant. The resistor, individually selected for its accuracy, is enclosed in a special tapered housing which provides a linear reduction in surge impedance directly proportional to the distance along the resistor. This produces the uniform, practically reflectionless line termination from dc to 2.4 GHz. Similar to Bird 8890-300 but 1000 Watt continuous rating. Used in excellent condition. Bird Specifications and Manual |
||||||
| |||||||
|
Bird 8251D Termaline RF Load 1 KW (New) DC-2500 MHz 1 KW RF Load Digital Broadcast 1-5/8" EIA Connector 8251D Bird Termaline® RF Coaxial Termination 1 kW Continuous Duty, Oil-Cooled, DC-2.4 GHz Digital Broadcast VSWR = 1.056 max., 470-860 MHz New Old Stock - New In Origianl Packing with Manuals Regular Price New is $1118.
The Model 8251 TERMALINE® Load Resistor is a portable, self-contained general purpose 50 ohm coaxial transmission line termination requiring no outside power source or additional equipment. It provides accurate, dependable, and practically nonreflective termination for testing and adjusting transmitters under nonradiating conditions. The load consists essentially of a cylindrical film type resistor immersed in a dielectric coolant. The resistor, individually selected for its accuracy, is enclosed in a special tapered housing which provides a linear reduction in surge impedance directly proportional to the distance along the resistor. This produces the uniform, practically reflectionless line termination from dc to 2.4 GHz. New in Box with Manuals Bird Specifications and Manual |
||||||
| |||||||
|
Bird 25-T-MN Termaline RF Load DC- 4GHz (New and Used) Bird Electronic 50 Ohm RF load, 25 Watts continuous, DC - 4GHz. Type N male coaxial connector. DC to 4 GHz. Used in excellent condition. Select new or used below. |
||||||
| |||||||
|
Bird 8251 Termaline RF Load 1 KW DC-2500 MHz 1 KW RF Load (New or Used) 8251 Bird Termaline® RF Coaxial Termination 1 kW Continuous Duty, Oil-Cooled Used in new condition or New, select in options below.
The Model 8251 TERMALINE® Load Resistor is a portable, self-contained general purpose 50 ohm coaxial transmission line termination requiring no outside power source or additional equipment. It provides accurate, dependable, and practically non-reflective termination for testing and adjusting transmitters under non-radiating conditions. The load consists essentially of a cylindrical film type resistor immersed in a dielectric coolant. The resistor, individually selected for its accuracy, is enclosed in a special tapered housing which provides a linear reduction in surge impedance directly proportional to the distance along the resistor. This produces the uniform, practically reflectionless line termination from dc to 2.4 GHz. Select New Or Used Below. Bird Specifications and Manual |
||||||
| |||||||
|
Bird 8201 Termaline RF Load 500 Watt DC-2500 MHz (Used) Bird 8201 Termaline® RF Coaxial Termination 500 Watt, Oil-Cooled, N Female Connector
The Model 8201 TERMALINE® Load Resistor is a portable, self-contained general purpose 50 ohm coaxial transmission line termination requiring no outside power source or additional equipment. It provides accurate, dependable, and practically non-reflective termination for testing and adjusting transmitters under non-radiating conditions. The load consists essentially of a cylindrical film type resistor immersed in a dielectric coolant. The resistor, individually selected for its accuracy, is enclosed in a special tapered housing which provides a linear reduction in surge impedance directly proportional to the distance along the resistor. This produces the uniform, practically reflectionless line termination from dc to 2.5 GHz. |
||||||
| |||||||
|
Bird 8401 Termaline RF Load 600 Watts DC-3000 MHzB Select New or Used Bird 8401 Termaline® RF Coaxial Termination 600 Watt, Oil-Cooled, N Female Connector
The Model 8401 TERMALINE® Load Resistor is a portable, self-contained general purpose 50 ohm coaxial transmission line termination requiring no outside power source or additional equipment. It provides accurate, dependable, and practically non-reflective termination for testing and adjusting transmitters under non-radiating conditions. The load consists essentially of a cylindrical film type resistor immersed in a dielectric coolant. The resistor, individually selected for its accuracy, is enclosed in a special tapered housing which provides a linear reduction in surge impedance directly proportional to the distance along the resistor. This produces the uniform, practically reflectionless line termination from dc to 2.5 GHz. |
||||||
| |||||||
|
Bird 8402 Termaline RF Load 600 Watts DC-3000 MHz Same specificatons as Bird 8401 (see above item) except that the factory supplied input connector was QC Type C(F). This item is shipped with a Type N(F) connector installed unless otherwise requested. |
||||||
| |||||||
|
Bird 8404 Termaline RF Load 600 Watts DC-3000 MHz Same specificatons as Bird 8401 (see above item 8401) except factory supplied Type N(M) to Type N(M) adapter was shipped with the item. This item is shipped with a Type N(F) connector installed. |
||||||
| |||||||
|
Bird 8080 Bird 8000 Termaline RF Load 25 Watts 25-T-MN 25 Watt 50 ohm Termaline RF Load, used in excellent condition. This is the Bird RF load that fits inside a Bird CC-1(3) leather case. DC to 4 GHz. Discontinued, limited quantity. |
||||||
| |||||||
|
Bird 8085 Termaline RF Load 50 Watts 50 Watts, 50 Ohms DC-3 GHz. Type N(M) input connector. Used in good condition. Discontinued, limited quantity. |
||||||
| |||||||
|
Bird 50-T-MN Termaline RF Load DC- 4GHz (New and Used) Bird Electronic 50 Ohm RF load, 50 Watts continuous, DC - 4GHz. Type N male coaxial connector. DC to 4 GHz. Used in excellent condition. Select Used or New Below. |
||||||
| |||||||
|
Bird 75-T-FN Termaline RF Load DC- 4GHz N(F) (New and Used) Bird Electronic 50 Ohm RF load, 75 Watts continuous, DC - 4GHz. Type N(F) coaxial connector. DC to 4 GHz. Similar to shown except Input connector is Type N(F). Used is new old stock in original packing. |
||||||
| |||||||
|
Bird 100-T-FN Termaline RF Load 100 Watts (NOS) Bird RF Load 100 Watts to DC-2.4 GHz. Continuous rating. Type N female connector, 50 Ohms. New condition. Also, select New or NOS below. NOS is new old stock. Similar to picture but with Type N(F) Connector. Specifications
|
||||||
| |||||||
|
Bird 100-ST-ME 7/16 DIN Termaline RF Load (Used) 100 Watts 0-4 GHz Bird 100-ST-ME 1/16 DIN RF Load
Product Specifications:
|
||||||
| |||||||
|
Bird 150-WT-FN Termaline RF Load 150 Watts (Used) 150 Watt DC-2.4 GHz 150 Watt, Convection-Cooled Dry Bird's RF terminations are world renowned for their high-quailty, robust construction and conservative power ratings. The use of non-magnetic materials and plating provide safety when used in high magnetic fields such as MRI.
|
||||||
| |||||||
|
Bird 8065 DC-2.4 GHz Termaline RF Load 160 Watts 160 Watts DC - 2.4 GHz. Continuous power rating is 160 Watts. Type N female QC connector, 50 Ohms. Used in excellent condition. Similar to item shown. Appx 7Lx5Wx3H, 4 lbs. |
||||||
| |||||||
|
Bird 8164 Termaline RF Load 100 Watts 0-2.5 GHz 100 Watts Continuous, 0-2.5 GHz. QC Type N(F) or N(M) input connectors. Bird packages this 100W RF load with several of the their wattmeter kits. In excellent condition. Similar to item shown. |
||||||
| |||||||
|
Bird 300-T Termaline RF Load 300 Watts DC-2.4 GHz 300-T Series Bird's RF terminations are world renowned for their high-quailty, robust construction and conservative power ratings. The use of non-magnetic materials and plating provide safety when used in high magnetic fields such as MRI. No fluids or maintenance required.
Select New our Used Below |
||||||
| |||||||
|
Bird 8166 Termaline RF Load (Used) 150 Watts 0-2.5 GHz 150 Watts Continuous, 0-2.5 GHz. QC Type N female input. This RF load is similar to the Bird 150-ST. At a little over 5 lbs this load is a heavy duty, serious RF Load that can be used into the microwave frequencies. In excellent condition with some minor scratches in the paint. |
||||||
| |||||||
|
Bird 8141 Termaline RF Load 250 Watts DC-2.5 GHz One of the most popular Bird RF loads, compact and handles high power. Termaline 50 Ohm 250 Watt continuous RF Load DC-2.5 GHz. Used in excellent condition. Tyne N female input. 250 Watt continuous, 300 Watts 10 minutes. |
||||||
| |||||||
|
Bird 8135 Termaline RF Load 150 Watt 0-1000 MHz Model 8135 is rated at 150 watts continuous with an impedance of 50 ohms. It has a Type N(F) input connector. 0-1000 MHz. Used, in excellent condition. |
||||||
| |||||||
|
Bird 8173 Termaline RF Load DC-1 GHz 300 Watts 300 Watt Continuous dury 50 Ohm dummy load. DC-1 GHz, type N female connector. Used in new condition. Type N(F) input connector. |
||||||
| |||||||
|
Bird 8865SC13 1 KW Termaline® RF Coaxial Termination 50 Ohm RF Load 1 KW Continuous Duty 8865SC13 Termaline® RF Coaxial Termination 1 kW, 13.56 MHz Ultra Stable, Oil-Cooled Tested to 450 MHz less than 1:1.2 SWR
* Ultra stable, oil-dielectric RF load for semiconductor processing applications. The Model 8865SC13 is an ultra-stable, low VSWR load for quick and precise measurement of generator power output when used with precision power sensors such as the Bird 4020 series. This load not only provides low VSWR, but also less than 0.1 dB total change in VSWR at process-critical frequencies. There is no need for load warm-up or risk of repeatability due to calibration “drift” over different lengths of time. This minimizes errors associated with the calibration process which controls one of the more critical variables within the etch process. Length 18", height 13", width 8", weight 30 lbs.
Designed for the semiconductor industry this 1 KW also serves well as a general purpose RF load for HF, VHF, and UHF frequecies. Tested to 450 MHZ with an SWR of 1:1.21. Compact vertical design with a small footprint. Tyoe N, LC, or UHF female input connector (speicify when ordering). |
||||||
| |||||||
|
Bird 8251D Termaline RF Load 1 KW DC-2500 MHz 1 KW RF Load (NEW) Digital Broadcast VSWR = 1.056 max 470-860 MHz 1 kW, Oil-Cooled Digital Broadcast Model 8251D 7/8 EIA Swivel Flange Connector New Old Stock, in sealed factory packing with manuals The 8251 Series are portable, self-contained general purpose 50 ohm coaxial transmission line terminations requiring no outside power source or additional equipment. The loads are Oil-assisted convection cooling for safe, continuous operation up to 1000W full rated power. They provide accurate, dependable, and practically nonreflective termination for testing and adjusting transmitters under nonradiating conditions. The load consists essentially of a cylindrical film type resistor immersed in a dielectric coolant. The resistor, individually selected for its accuracy, is enclosed in a special tapered housing which provides a linear reduction in surge impedance directly proportional to the distance along the resistor. Digital Broadcast Model with 7/8 EIA Swivel Flange (M) Connector. VSWR = 1.056 max from 470-860 MHz Bird Specifications and Manual |
||||||
| |||||||
|
Bird 8862 Termaline RF Load 1 5/8 EIA Flange (New or Used) 1.5 KW DC-2 GHz 8862 Termaline® RF Coaxial Termination 1500 Watts Oil-Cooled Compact, about 1/2 the Weight and size of the 2.5 kW loads
The Model 8862 TERMALINE® Load Resistor is a self-contained high-power 50 ohm coaxial transmission line termination requiring no outside power source or additional equipment. It provides accurate, dependable, and practically nonreflective termination for testing and adjusting transmitters under nonradiating conditions. The load consists essentially of a cylindrical film type resistor immersed in a dielectric coolant. The resistor, individually selected for its accuracy, is enclosed in a special tapered housing which provides a linear reduction in surge impedance directly proportional to the distance along the resistor. This produces the uniform, practically reflectionless line termination from dc to 2 GHz. Used in Good Condition Product Specifications:
Operating Manual and Specifications |
||||||
| |||||||
|
Bird 8861 Termaline RF Load 1 5/8 EIA Unflanged (New or Used) 1.5 KW 1500 Watts DC-2 GHz 8861 Termaline® RF Coaxial Termination 1-5/8" EIA, Unflanged 1500 Watts Oil-Cooled Used in New condition, 90 day warranty Compact, about 1/2 the Weight and size of the 2.5 kW loads
The Model 8861 TERMALINE® Load Resistor is a self-contained high-power 50 ohm coaxial transmission line termination requiring no outside power source or additional equipment. It provides accurate, dependable, and practically nonreflective termination for testing and adjusting transmitters under nonradiating conditions. The load consists essentially of a cylindrical film type resistor immersed in a dielectric coolant. The resistor, individually selected for its accuracy, is enclosed in a special tapered housing which provides a linear reduction in surge impedance directly proportional to the distance along the resistor. This produces the uniform, practically reflectionless line termination from dc to 2 GHz. Used in New Condition Product Specifications:
Operating Manual and Specifications |
||||||
| |||||||
|
Bird 8431 Termaline RF Load (Dry) 600 Watts DC-2.5 GHz The 8431 Dry Load has a power rating of 600W vertical or 500W horizontal, continuous.
|
||||||
| |||||||
|
Bird 8251T-230 Termaline RF Load 1 KW DC-2500 MHz 1 KW RF Load With Thermal Switch Option 230 Degree (New or Used) 8251T-230 Bird Termaline® RF Coaxial Termination 1 kW Continuous Duty, Oil-Cooled Thermal Switch option 230 installed 1-5/8 Flange Fixed(M) Shown or N(F) or any QC Used in new condition or New, select in options below.
The Model 8251 TERMALINE® Load Resistor is a portable, self-contained general purpose 50 ohm coaxial transmission line termination requiring no outside power source or additional equipment. It provides accurate, dependable, and practically non-reflective termination for testing and adjusting transmitters under non-radiating conditions. The load consists essentially of a cylindrical film type resistor immersed in a dielectric coolant. The resistor, individually selected for its accuracy, is enclosed in a special tapered housing which provides a linear reduction in surge impedance directly proportional to the distance along the resistor. This produces the uniform, practically reflectionless line termination from dc to 2.4 GHz. Select New Or Used Below. Bird Specifications and Manual |
||||||
| |||||||
2-2000-MHz-(Uses-Model-43-Elements)1423-1502_th.jpg)
1.5-KW-DC-2-GHz1425-1504_th.jpg)
