|
| |
Comet CMX-2300 HF/VHF/VHF Dual Meter RF Wattmeter
Peak and Average PowerNEW DUAL RF POWER METER by COMET ANTENNA - 1.8-200 MHz and 140-525 MHz simultaneously measured on two separate meters
- Full color lighted cross needle display reads FWD, REF, and SWR simultaneously
- Switchable peak and average reading (external 12VDC required for PEP Mode)
- Power Range: 30/300/3kW (1.8-200MHz) and 20W/50W/200W (140-525MHz)
- Input loss: Less than 0.2dB
- Monitor connection (BNC), -30dB connection to station monitor or frequency counter.
- Accuracy: +/-10% full scale
- Power cable for connecting to external 12vdc included.
- Power supply is not included, power cable for 12VDC is included.
- Connectors: SO-239
- Dimensions (approx.) 10" W x 5.25" D x 3.75" H
|
| - Please Click Here for Our New Store & Current Pricing - Martin RF Supply - |
|
|
|
| |
Daiwa CN-801HP HF/VHF RF Wattmeter
Peak and Average PowerFrequency: 1.8 - 200 MHz
Average and True PEP Reading Meter
Power Range Forward: 20/200/2000 Watts
Tolerance: +/- 10% (at full scale)
SWR Detection Sensitivity: 5 W min
Input/Output Impedence: 50 OHM
Input/Output Connectors: SO-239
Dimensions & Weight: 6.25 x 4.3" x 4.8" / 2lbs. 3ozs.
|
| - Please Click Here for Our New Store & Current Pricing - Martin RF Supply - |
|
|
|
| |
Daiwa CN-101L Wattmeter
Peak and Average PowerFrequency: 1.8 - 150 MHz
Average and True PEP Reading Meter
Power Range Forward: 15/150/1000 Watts
Power Rating: 1.5kW (1.8-60MHz) 1kW (144MHz)
Tolerance: +/- 10% (at full scale)
SWR Detection Sensitivity: 4 W min
Input/Output Impedence: 50 OHM
Input/Output Connectors: SO-239
Dimensions & Weight: 5 x 3" x 4" / 1lb. 8ozs
|
| - Please Click Here for Our New Store & Current Pricing - Martin RF Supply - |
|
|
|
| |
12VDC Wall adapter for Daiwa/Comet Power MetersDaiwa Power Meters require an external 12VDC supply for the LED Dial Lamp and PEP operation.
A 12VDC cable is included with each meter for connection to your 12VDC supply.
If you don't have a 12VDC external supply you will need this adapter for PEP mode and for the dial light.
Average power measurements do not require external power. 12VDC 1A Regulated power adapter, input 115/230VAC.
Coaxial DC Plug 2.5mm-5.5mm.
Works for all Daiwa and Comet power meters that are listed on our website.
|
| - Please Click Here for Our New Store & Current Pricing - Martin RF Supply - |
|
|
|
| |
Daiwa CN-103L VHF/UHF RF Wattmeter
Peak and Average PowerFrequency: 140 - 525 MHz
Average and True PEP Reading Meter
Power Range Forward: 20/200 Watts
Power Rating: 200W (140-525MHz)
Tolerance: +/- 10% (at full scale)
SWR Detection Sensitivity: 4 W min
Input/Output Impedance: 50 OHM
Input/Output Connectors: SO-239
Dimensions & Weight: 5 x 3" x 4" / 1lb. 8ozs.
|
| - Please Click Here for Our New Store & Current Pricing - Martin RF Supply - |
|
|
|
| |
Daiwa CN-103L(N) VHF/UHF RF Wattmeter
Peak and Average PowerFrequency: 140 - 525 MHz
Average and True PEP Reading Meter
Power Range Forward: 20/200 Watts
Power Rating: 200W (140-525MHz)
Tolerance: +/- 10% (at full scale)
SWR Detection Sensitivity: 4 W min
Input/Output Impedance: 50 OHM
Input/Output Connectors: Type N(F)
Dimensions & Weight: 5 x 3" x 4" / 1lb. 8ozs.
|
| - Please Click Here for Our New Store & Current Pricing - Martin RF Supply - |
|
|
|
| |
Daiwa CN-801V VHF/UHF RF Wattmeter
Peak and Average Power, UHF ConnectorsFrequency: 140 - 525 MHz
Average and True PEP Reading Meter
Power Range Forward: 20/200W
Tolerance: +/- 10% (at full scale)
SWR Detection Sensitivity: 5 W min
Input/Output Impedence: 50 OHM
Input/Output Connectors: SO-239
|
| - Please Click Here for Our New Store & Current Pricing - Martin RF Supply - |
|
|
|
| |
Daiwa CN-801G D-Star RF Wattmeter
Peak & Average PowerFrequency: 900-1300 MHz
Average and True PEP Reading Meter
D-Star Compatible
Power Range Forward: 2/20W
Tolerance: +/- 10% (at full scale)
SWR Detection Sensitivity: 0.2 W min
Input/Output Impedance: 50 OHM
Input/Output Connectors: N-Type
Dimensions & Weight: 6.25 x 4.3" x 4.8" / 2lbs. 3ozs
|
| - Please Click Here for Our New Store & Current Pricing - Martin RF Supply - |
|
|
|
| |
Daiwa CN-801SII UHF RF Wattmeter
Peak & Average Power GSM & CellularCN-801SII Features: Frequency 900-2500 MHz
Average and True PEP Reading Meter
GSM & Cellular Frequency Bands
Power Range Forward: 0.2/2/20W
Tolerance: +/- 10% (at full scale)
SWR Detection Sensitivity: 0.5 W min
Input/Output Impedance: 50 OHM
Input/Output Connectors: N-Type
Dimensions & Weight: 6.25 x 4.3" x 4.8" / 2lbs. 3ozs.
NOTE: 13.8 VDC is required to operate the 200 mW scale.
A DC cable is supplied to conect to a DC source.
We offer 12 VDC Wall Adapters as an accessory, see below items.
|
| - Please Click Here for Our New Store & Current Pricing - Martin RF Supply - |
|
|
|
| |
Daiwa CN-801VN VHF/UHF RF Wattmeter
Peak and Average Power N(F) ConnectorsFrequency: 140 - 525 MHz
Average and True PEP Reading Meter
Power Range Forward: 20/200W
Tolerance: +/- 10% (at full scale)
SWR Detection Sensitivity: 5 W min
Input/Output Impedence: 50 OHM
Input/Output Connectors: Type N(F)
|
| - Please Click Here for Our New Store & Current Pricing - Martin RF Supply - |
|
|
|
| |
12VDC Wall adapter for Daiwa/Comet Power MetersDaiwa Power Meters require an external 12VDC supply for the LED Dial Lamp and PEP operation.
A 12VDC cable is included with each meter for connection to your 12VDC supply.
If you don''t have a 12VDC external supply you will need this adapter for PEP mode and for the dial light.
Average power measurements do not require external power. 12VDC 1A Regulated power adapter, Input 115/230VAC.
Coaxial DC Plug 2.5mm-5.5mm.
Works for all Daiwa and Comet power meters that are listed on our website.
|
| - Please Click Here for Our New Store & Current Pricing - Martin RF Supply - |
|
|
|
| |
Daiwa CN-801HP3 HF/VHF 3KW RF Wattmeter
Peak and Average PowerNEW - 3 KW Version of the CN801HP
Frequency: 1.8 - 200 MHz
Average and True PEP Reading Meter
Power Range Forward: 30/300/3000 Watts
Tolerance: +/- 10% (at full scale)
SWR Detection Sensitivity: 5 W min
Input/Output Impedence: 50 OHM
Input/Output Connectors: SO-239
Dimensions & Weight: 6.25 x 4.3" x 4.8" / 2lbs. 3ozs.
|
| - Please Click Here for Our New Store & Current Pricing - Martin RF Supply - |
|
|
|
| |
Comet Antenna Analyzer CAA-500 (New)CAA-500 Antenna Antenna Analyzer by Comet CQ Magazine Product Review - Frequency Range Continuous Coverage 1.8 - 500 MHz
- Internal Frequency Counter
- Dual Needle Cross Needle VSWR Display
- A transmiiter is not required, stand alone operation
- Functions: SWR and Impedance
- Portable - operates on 4x AA Batteries (not included)
Highly accurate analog meter displays SWR and impedance in real time, continuously, as you sweep the selected frequency range. Measures and displays antenna properties without the need for a separate transmitter and SWR bridge. The primary tool for any antenna adjustment, diagnostic, or building project. Main Features: - 1.8-500MHz Continuous.
- Measures SWR & Impedance Simultaneously
- Separate UHF Input with N(F) Connector
Operating Range 1.8 - 500 MHz
Band A Range 1.8 - 5 MHz
Band B Range 5 - 15 MHz
Band C Range 15 - 45 MHz
Band D Range 45 - 95 MHz
Band E Range 95 - 162 MHz
Band F Range 162 - 255 MHz
High Range 255 - 500 MHz
Impedance Range 12.5 - 300 ohms
VSWR Range 1:1 to infinity
Oscillator Output 113 dBu/50 Ohm
External Power 8-16 VDC 250 ma
Size 3.3 x 6.9 x 2.5 inches (80x170x60 mm)
Weight 28 oz. (800 g)
|
| - Please Click Here for Our New Store & Current Pricing - Martin RF Supply - |
|
|
|
| |
REDOT Digital Dual Band VHF/UHF Power & SWR Meter
1-120 Watts 100-500 MHz Model 1050AMini Digital VHF/UHF Power and SWR Meter . 100% new, factory packed. The Perfect Match for Your Dual Band VHF/UHF Transcievers! Manuafactured by REDOT. Specifications: - Maxium Power: 120W
- VSWR 1.00~19.9
- Connectors: Type N(F)
- Accuracy: Tested to +/- 5% of reading at 145 MHz and 435 MHz.
- Frequenxcy Range: 100MHZ-500MHZ
- Sampling rate: 100/S
- Sampling: 12BIT (Oversampling)
- RF Connector: N(F)
- Insertion Loss: < 0.15dB(VHF) , < 0.25dB(UHF)
- Return Loss: >30db
- Directional: >30db(VHF), >26db(UHF)
- Temperature: 0?~70?
- Power consumption :<3mA (Backlight Off) <10mA (Backl Light On)
- Battery: 3 x AAA Type Battery or Rechargeable Battery (not included)
- Dimension: 67x69x37 (mm)
- Weight: 300g (not including batteries)
(batteries are not included in this sale) Press the red button to power on. After 2 seconds of LCD self test, it's ready for normal measurement. UV-Band meter will display in sequence:"+ XXX P" (pass through power),"- XXX P" (feed back power)," XXX ?" (SWR value), 2 seconds display for each mode. Press the red button will hold the current display. Press it again to continue the display. Under the environment of night or weak illumination, just press and hold the red button for 1 second to turn the blue back light on. Press and hold the red button for 1 second again to turn it off. 8 minutes after no power was measured, it will power off automatically. Press and hold the red button for 2 seconds to turn off manually. Fully Tested and 90 Day Replacement Warranty.
|
| - Please Click Here for Our New Store & Current Pricing - Martin RF Supply - |
|
|
|
| |
REDOT Digital 3-60 MHz Power & SWR Meter SSB/Avg
1-199 Watts HF/6Mtrs (QRP Ready) Model 2016BMini Digital HF/6Mtr Power and SWR Meter
100% new, factory packed. The Perfect Match for your HF/6Mtr Transcievers!
Manuaactured by REDOT. Specifications: - Maxium Power: 199W (PEP/Avg)
- VSWR 1.00~19.9
- Connectors: Type UHF(SO-239)
- Accuracy: Tested to +/- 8% of reading
- Frequenxcy Range: 3-60 MHz
- Sampling rate: 100/S
- Sampling: 12BIT (Oversampling)
- Insertion Loss: < 0.15dB
- Return Loss: >30db
- Directional: >30db
- Temperature: 0-70 C
- Power consumption :<3mA (Backlight Off) <10mA (Back Light On)
- Battery: 3 x AAA Type Battery or Rechargeable Battery (not included)
- Dimension: 67x69x37 (mm)
- Weight: 300g (not including batteries)
(batteries are not included in this sale) Press the red button to power on. After 2 seconds of LCD self test, it's ready for normal measurement. Power meter will display in sequence:"+ XXX P" (pass through power),"- XXX P" (feed back power)," XXX ?" (SWR value), 2 seconds display for each mode. Press the red button will hold the current display. Press it again to continue the display. Press and Hold for PEP/Peak Power measurements. Under the environment of night or weak illumination, just press and hold the red button for 1 second to turn the blue back light on. Press and hold the red button for 1 second again to turn it off. 8 minutes after no power was measured, it will power off automatically. Press and hold the red button for 2 seconds to turn off manually. Fully Tested and 90 Day Replacement Warranty.
|
| - Please Click Here for Our New Store & Current Pricing - Martin RF Supply - |
|
|
|
| |
REDOT Digital 1.6-60 MHz Power & SWR Meter
1-199 Watts HF/6Mtrs (QRP Ready) Model 2016AMini Digital HF/6Mtr Power and SWR Meter
100% new, factory packed. The Perfect Match for your HF/6Mtr Transcievers!
Manufactured by REDOT. Specifications: - Maxium Power: 199W (Avg)
- VSWR 1.00~19.9
- Connectors: Type UHF(SO-239)
- Accuracy: Tested to +/- 8% of reading
- Frequenxcy Range: 1.6-60 MHz
- Sampling rate: 100/S
- Sampling: 12BIT (Oversampling)
- Insertion Loss: < 0.15dB
- Return Loss: >30db
- Directional: >30db
- Temperature: 0-70 C
- Power consumption :<3mA (Backlight Off) <10mA (Back Light On)
- Battery: 3 x AAA Type Battery or Rechargeable Battery (not included)
- Dimension: 67x69x37 (mm)
- Weight: 300g (not including batteries)
(batteries are not included in this sale) Press the red button to power on. After 2 seconds of LCD self test, it's ready for normal measurement. Power meter will display in sequence:"+ XXX P" (pass through power),"- XXX P" (feed back power)," XXX ?" (SWR value), 2 seconds display for each mode. Press the red button will hold the current display. Press it again to continue the display. Press and Hold for PEP/Peak Power measurements. Under the environment of night or weak illumination, just press and hold the red button for 1 second to turn the blue back light on. Press and hold the red button for 1 second again to turn it off. 8 minutes after no power was measured, it will power off automatically. Press and hold the red button for 2 seconds to turn off manually. Fully Tested and 90 Day Replacement Warranty.
|
| - Please Click Here for Our New Store & Current Pricing - Martin RF Supply - |
|
|
|
| |
Comet CAA-5SC Storage/Carry Case for CAA-500Rugged padded case with shoulder strap.
|
| - Please Click Here for Our New Store & Current Pricing - Martin RF Supply - |
|
|
 "Comet CMX-2300 HF/VHF/VHF Dual Meter RF WattmeterPeak and Average Power")
 "Daiwa CN-801HP HF/VHF RF WattmeterPeak and Average Power")
 "Daiwa CN-101L WattmeterPeak and Average Power")
 "12VDC Wall adapter for Daiwa/Comet Power Meters")
 "Daiwa CN-103L VHF/UHF RF WattmeterPeak and Average Power")
 "Daiwa CN-103L(N) VHF/UHF RF WattmeterPeak and Average Power")
 "Daiwa CN-801V VHF/UHF RF WattmeterPeak and Average Power, UHF Connectors")
 "Daiwa CN-801G D-Star RF WattmeterPeak & Average Power")
 "Daiwa CN-801SII UHF RF WattmeterPeak & Average Power GSM & Cellular")
 "Daiwa CN-801VN VHF/UHF RF WattmeterPeak and Average Power N(F) Connectors")
 "12VDC Wall adapter for Daiwa/Comet Power Meters")
 "Daiwa CN-801HP3 HF/VHF 3KW RF WattmeterPeak and Average Power")
 "Comet Antenna Analyzer CAA-500 (New)")
 "REDOT Digital Dual Band VHF/UHF Power & SWR Meter1-120 Watts 100-500 MHz Model 1050A")
 "REDOT Digital 3-60 MHz Power & SWR Meter SSB/Avg1-199 Watts HF/6Mtrs (QRP Ready) Model 2016B")
 "REDOT Digital 1.6-60 MHz Power & SWR Meter1-199 Watts HF/6Mtrs (QRP Ready) Model 2016A")
 "Comet CAA-5SC Storage/Carry Case for CAA-500")