|
|
| |
5018 5018B 25mW - 60 Watts Peak, Wideband Power Sensor (New) 150 MHz- 4.0 Ghz WPS Sensor Use with Bird 5000XT or with your PC Stand Alone5017B 25mW - 60 Peak Watts, Wideband Power Sensor, USB, RS232 Bird's Wideband Power Sensor Series (WPS) never requires field calibration, only requires calibration once per year and is traceable to National Institute of Standards and Technology (NIST). The WPS measures True Average Power, Peak Power, and Duty Cycle directly with exceptional accuracy and uses these precise measurements to calculate a wide range of other important factors, such as VSWR, Return Loss, Reflection Coefficient, Crest Factor, Average Burst Power, and CCDF. Specifications: - Frequency Range 150 MHz - 4.0 GHz
- Power Range 25mW - 25 Watts Avg 60 Watts Peak
- Impedance (?) 50 (nominal)
- Reflection Measurement Characteristics
Measurement Range: Return Loss, 0.0 to 23 dB (VSWR, 1.15 to 99.9 Rho, 0.07 to 1.0) - Minimum Forward Power for Reflected Measurement 5W
- Accuracy Average Power = +/-5% of reading typical
Burst Average Power = +/-7% of reading typical Peak Envelope Power = +/-8% of Reading typical CCDF = +/-0.2% typical - Insertion VSWR <1.05
- Insertion Loss <0.05
- Connectors N (F)
- Power Supply USB Port: less than one low-power USB load
- DC Input Connector: 7-18 VDC at less than 0.1A
- Interfaces DPM 5000 Interface: DB9 proprietary interface
PC Interface (1): RS-232, 9600 Baud, no parity, 8 data bits, 1 stop bit, DB9 PC Interface (2): USB 1.1 Type B, compliant interface - Weight 1.2 lb. maximum
- Dimensions H x W x D [inches (mm)] 4.8" x 4.6" x 1.3"
(122 mm x 117 mm x 33 mm) - Directivity 28 dB up to 100 MHz, 30 dB from 100 to 1000 MHz
- Data Logging Requires 5000-XT or VPM2 PC Software Kit
5017 Sensor Data Sheet
|
|
|